Search results

1002 results for "MRCOOL DIY Select"

Showing 1–24 of 1002 results

article

What Is the New MRCOOL DIY Select Series and Why Should You Consider It?

MRCOOL has expanded its popular do-it-yourself mini-split lineup with the new MRCOOL DIY Select Series. Designed as a more affordable entry point into ductless heating and cooling, DIY Select keeps the features most homeowners care about while trimming some of the efficiency and warranty benefits found on the MRCOOL Easy Pro. For a bedroom, garage, workshop, home office, rental property, or other single-room application, that tradeoff may make a lot of sense. What is the MRCOOL DIY Select Series? The DIY Select is a single-zone ductless mini-split heat pump designed for homeowner installation. Like other MRCOOL DIY systems, it provides both air conditioning and heating without requiring existing ductwork. The series is available in four sizes: System size Recommended coverage* Voltage SEER2 9,000 BTU Up to 400 sq. ft. 115V 17.5 12,000 BTU Up to 550 sq. ft. 115V 17.5 18,000 BTU Up to 800 sq. ft. 208/230V 17.3 24,000 BTU Up to 1,050 sq. ft. 208/230V 16.5 *Coverage estimates assume favorable installation conditions. Insulation, ceiling height, climate, windows, sun exposure, and room layout can all affect proper sizing. MRCOOL’s published specifications show that DIY Select systems use inverter-driven heat-pump technology and the newer R-454B refrigerant. They include an 11.5-foot factory-precharged Quick Connect line set, allowing homeowners to connect the refrigerant lines without brazing, vacuum pumps, or handling loose refrigerant. MRCOOL DIY Select brochure What makes DIY Select genuinely DIY-friendly? The most intimidating part of installing a conventional mini split is usually the refrigerant work. Traditional systems generally need to be evacuated with a vacuum pump, checked with gauges, and commissioned by someone with the appropriate tools and experience. DIY Select removes much of that complexity. Its sealed, precharged connections are designed to be joined using ordinary hand tools. The included DIYPRO cable also simplifies the connection between the indoor and outdoor units. That does not mean every installation is completely tool-free. You still need to mount the equipment, drill the wall penetration, route the drain line, make electrical connections, and comply with local codes. Depending on your location and comfort level, you may still want an electrician to install the required dedicated circuit or disconnect. Nevertheless, the Quick Connect design can eliminate a major professional-labor expense and make a mini-split project much more approachable. Useful features without a premium price DIY Select is positioned as MRCOOL’s budget-oriented DIY system, but it is not a bare-bones air conditioner. It includes many of the everyday features customers expect from a modern mini split: Heating, cooling, fan, auto, sleep, and dry modes Variable-speed inverter operation Built-in Wi-Fi and MRCOOL Comfort app control Scheduling and remote temperature adjustment Amazon Alexa and Google Assistant compatibility Reusable filters Quiet indoor operation Gold Fin corrosion-resistant coating Factory-precharged R-454B line set Wireless handheld remote The indoor air handler is also offered in white or black. The black option is especially appealing when a standard white mini split would stand out against darker walls, modern finishes, workshops, entertainment rooms, or commercial interiors. MRCOOL DIY Select vs. MRCOOL Easy Pro The DIY Select and MRCOOL Easy Pro have a great deal in common. Both are single-zone heat pumps, both come in 9K through 24K capacities, and both use precharged R-454B Quick Connect line sets. The major differences are purchase price, efficiency, warranty coverage, and indoor-unit color choices. Feature MRCOOL DIY Select MRCOOL Easy Pro Primary advantage Lower upfront price Greater efficiency and warranty coverage Capacities 9K, 12K, 18K and 24K 9K, 12K, 18K and 24K Included line set 11.5-foot precharged line set 11.5-foot precharged line set Refrigerant R-454B R-454B SEER2 range 16.5–17.5 18.9–20.2 Smart controls Wi-Fi, app and voice control Wi-Fi, app and voice control Indoor-unit colors White or black Primarily white Published base warranty 1-year parts and 2-year compressor 3-year parts and 5-year compressor MRCOOL lists Easy Pro ratings of 20.2 SEER2 for the 9K, 19.5 for the 12K, 20 for the 18K, and 18.9 for the 24K. That makes Easy Pro the more energy-efficient choice in every capacity. Easy Pro 9K specifications, Easy Pro 12K specifications, Easy Pro 18K specifications, Easy Pro 24K specifications Warranty terms can change and may depend on registration, so buyers should verify the coverage included with the exact model before ordering. Why should you consider the DIY Select? The strongest reason to choose DIY Select is simple: lower upfront cost. If you want dependable heating and cooling but do not need the highest available efficiency rating, DIY Select offers the core MRCOOL DIY experience at a more accessible price. That can make it particularly attractive for: Garages and workshops Guest rooms and bonus rooms Home offices Finished basements Rental properties Seasonal spaces Budget-conscious renovations Rooms where a black air handler fits the design better The included 11.5-foot line set is especially convenient for a straightforward back-to-back installation, where the indoor air handler and outdoor condenser sit on opposite sides of the same exterior wall. When is Easy Pro worth the upgrade? Easy Pro is likely the better investment when the system will operate heavily throughout the year. Its higher SEER2 ratings can reduce cooling energy consumption, and its longer published warranty provides additional protection. Consider Easy Pro if: The mini split will be used daily Electricity rates are high in your area Cooling efficiency is a priority You expect to own the system for many years Longer warranty coverage is important A specific efficiency rating is needed for a rebate Rebate requirements vary widely, and some programs require professional installation or particular efficiency certifications. Always verify the rules before purchasing based on an expected incentive. The Bottom Line The MRCOOL DIY Select is not intended to replace Easy Pro in every situation. It gives homeowners another choice. Choose DIY Select when affordability, straightforward installation, smart controls, and flexible styling are your main priorities. Choose Easy Pro when you are willing to spend more upfront for better efficiency and longer base warranty coverage. Either way, proper sizing and installation planning matter more than choosing the largest unit. If you are unsure which capacity or series fits your space, contact Chill Mini Splits before ordering. Shop MRCOOL DIY Select systems or compare MRCOOL Easy Pro systems.

article

What Comes With a MRCOOL DIY Mini Split? A Complete Buying Checklist

What Comes With a MRCOOL DIY Mini Split? A complete MRCOOL DIY mini-split package usually includes the outdoor condenser, the indoor air handler or handlers, and the Quick Connect line set or line sets you selected. Not every MRCOOL listing is a complete system. A page marked “condenser only” or “air handler only” is one part of a system.  Electrical supplies, a condenser pad or bracket, line-set covers, and some drain materials are also commonly sold separately. On our site, they are usually located under "optional accessories" on our product pages. The safest rule is simple: read the “What’s included” section on the exact product page before ordering. Product photos may show a full system even when the listing is for one component. Start by identifying the type of listing MRCOOL DIY equipment is sold in several ways. The title and product description tell you whether you are looking at a full package or one piece. Example of complete system: Listing type What it normally means What to confirm Complete single-zone system One outdoor unit, one indoor unit, and the selected line-set package Line-set length, voltage, mounting hardware, and electrical supplies Complete multi-zone bundle One outdoor unit and the listed indoor units; line sets may depend on your selections One correct line set per zone, exact head sizes, and every dropdown choice Condenser only The outdoor unit, not a working system by itself Compatible indoor units, line sets, controls, and accessories Air handler only One indoor unit, not a working system by itself Compatible condenser, correct line set, and capacity match Build Your Own system You choose the condenser, each indoor unit, each line set, and accessories Every room, line length, head type, and electrical requirement What normally comes with a complete MRCOOL DIY system? A current 5th Generation complete system normally starts with these four groups of parts: Outdoor condenser: The cabinet that contains the compressor and outdoor coil. Its refrigerant charge is designed for the approved MRCOOL DIY Quick Connect setup. Indoor air handler: A wall-mounted unit or ceiling cassette for each zone. A wall mount normally includes its remote, filter, mounting plate, and model-specific installation parts. Quick Connect line set: A sealed, pre-charged pair of copper refrigerant lines in the selected length. Current Chill Mini Splits line-set packages may also include communication wire, a wall sleeve, drain extension, and protective wrap. Controls and documentation: Remote controls, batteries where listed, manuals, and built-in or included smart-control hardware for the exact model. There is an important catch: a line set is not included with every component listing. On a configurable bundle, it may be added through a length selector. A condenser-only page does not turn into a complete system just because the outdoor unit is pre-charged. What is usually sold separately? These items are commonly needed but should not be assumed to be in the equipment box: A level condenser pad or a compatible wall bracket A dedicated breaker, correctly sized wire, disconnect box, and electrical whip A surge protector sized and installed for the equipment Decorative line-set cover for the outdoor wall Extra drain tubing, fittings, supports, or insulation for the planned route Wall anchors, fasteners, sealant, and weatherproofing materials suited to the building Tools such as a level, torque wrench, drill, hole saw, and personal protective equipment Permit, inspection, or licensed electrical work required by local rules An “electrical kit” can make shopping easier, but it does not replace checking the manufacturer’s minimum circuit ampacity and maximum overcurrent protection for the exact model. Those values help an electrician choose the circuit and breaker. Read our 115V vs. 230V mini-split electrical guide before assuming an existing outlet or circuit will work. Does a MRCOOL DIY system include a drain line? Current Quick Connect packages may include a drain-line extension, and indoor-unit packages include model-specific drain parts. However, your home may need more tubing or fittings to reach a safe discharge point. Plan the entire drain route before ordering. A wall-mounted air handler normally drains downhill by gravity. If a gravity route is not possible, it may need a separate compatible condensate pump. MRCOOL DIY 5th Generation ceiling cassettes are different: they have a built-in condensate pump. You normally do not need to buy a second external pump for the cassette. You still need the correct drain tubing and a discharge route that follows the manual’s lift, slope, and support limits. What the DIY design removes—and what it does not The main DIY advantage is the pre-charged Quick Connect line set. When approved parts are installed exactly as directed, the installer does not have to cut and flare copper tubing, pull a vacuum, or add refrigerant during a standard installation. That does not make every part of the job tool-free. You still have to mount heavy equipment, make a wall opening or prepare a ceiling cavity, route the lines without kinking them, manage condensate, weatherproof the opening, and complete the electrical connection safely. Local rules may require permits or licensed work. A dedicated circuit and outdoor disconnect often call for an electrician. Structural changes and difficult overhead work also deserve professional help. Five checks to make before adding accessories Measure the line-set route. Follow the real path from each indoor unit to the condenser, including bends and vertical travel. Do not use a straight-line room measurement. See our line-set measuring guide. Check the voltage. Confirm whether the exact system is 115V or 230V and whether your electrical panel has room for the required circuit. Choose the condenser location. Decide whether the unit will sit on a pad or an approved bracket. Leave the clearances required by the manual. Plan the drain. Know where water will go in cooling mode. Avoid walkways, hidden wall cavities, and places where discharge can freeze or cause damage. Check the building surface. Match anchors, flashing, sealant, and supports to wood, masonry, siding, roof structure, or ceiling framing. Single-zone shopping checklist For one room, confirm that your cart has: One complete single-zone system in the correct BTU size and voltage One approved line set in a length that reaches without splicing A pad or bracket for the condenser The correct breaker, wire, disconnect, and whip A planned drain route and any extra drain materials Line cover, surge protection, sealant, anchors, and needed tools Do not size a system from square footage alone. Insulation, windows, ceiling height, climate, and room use can change the load. An oversized mini split can short-cycle or control humidity poorly, while an undersized one may struggle during extreme weather. Multi-zone shopping checklist A multi-zone cart has more chances for a missing or mismatched part. Confirm: One compatible outdoor condenser with enough approved ports One compatible indoor unit for every room An approved total indoor-capacity combination for that condenser One correct line set for every connected indoor unit The correct pipe size and connection for each head Individual line lengths, total combined length, and vertical limits A drain plan for every indoor unit All shared electrical and mounting accessories A four-zone condenser does not mean every four-head combination is approved. Use the current manufacturer matchup chart and full model numbers. If one room is not ready, also check the manual before planning to leave a port unused. The easiest way to avoid a missing part Build the system from the rooms backward. First choose the indoor-unit type and capacity for each room. Next measure every line-set route. Then choose a condenser that accepts the complete combination. Add the mounting, drain, electrical, protection, and finish materials last. The Build Your Own MRCOOL DIY system tool lets you select the condenser, room units, line lengths, and accessories in one place. Chill Mini Splits also reviews builder orders for sizing and compatibility before shipment. The final product page and order confirmation remain the source of truth for what is included. Frequently asked questions Does every MRCOOL DIY system include a line set? No. Complete bundles often include or let you select line sets, but condenser-only and air-handler-only listings do not. Check the exact page and every option selected. Does MRCOOL DIY include the electrical kit? Do not assume it does. Breaker, wire, disconnect, whip, and surge protection are commonly separate. They must match the exact model and local electrical code. Does it include a condenser pad or wall bracket? These are commonly optional accessories. Choose the mounting method after checking the site, required clearances, snow level, drainage, and wall structure. Do I need a condensate pump for a MRCOOL ceiling cassette? The current MRCOOL DIY 5th Generation ceiling cassette has a built-in condensate pump, so a separate external pump is not normally needed. It still needs properly routed drain tubing. Can I use any mini-split line set? No. Use the approved MRCOOL DIY Quick Connect line set for the system’s generation, refrigerant, pipe size, and length. Do not mix R-410A and R-454B components. Does “pre-charged” mean the system is complete? No. It describes the refrigerant setup. You still need compatible indoor and outdoor equipment, approved line sets, controls, drainage, electrical connections, and mounting materials. Sources MRCOOL DIY 5th Generation Quick Start Guide MRCOOL DIY 5th Generation brochure MRCOOL DIY 5th Generation multi-zone installation and owner’s manual MRCOOL DIY 5th Generation multi-zone condenser page MRCOOL DIY 5th Generation wall-mount air handler page MRCOOL DIY 5th Generation ceiling cassette page Chill Mini Splits Build Your Own system tool Package contents and specifications can change. Always verify the exact product page, model numbers, and current installation documents before ordering.